prasa śrubowa
Screw Press 1
Click to enlarge
prasa śrubowa
Chamber Press
Back to products
filtr taśmowy
Belt Filter

Screw Press

The screw press is used for dewatering and thicking sludge from industrial processes.

Made of 316L acid-resistant steel. Powered by a pump, gravitationally from the tank or directly from the hopper. The device is equipped with a power station. This ensures greater efficiency and a better separation rate, especially with sticky materials. The dry matter content is regulated by the pressure force of the exhaust flap of the separator.

Category:
Zapytaj naszego doradcy

DO YOU HAVE ANY QUESTIONS? Help

Having trouble choosing the right product? Write to us or call. Our experienced traders will help you make the right decision.

They are here to help you choose the right product or to solve a technical problem. If you have any questions about our company or offer, please feel free to contact us.

CONTACT US


Tel:
 + 48 24 276 13 80

E-mail:
 info@marextechnology.com

Address: Ul. Płońsk 10,
09-210 Drobin, Poland

Not sure what to choose? Contact us-we will jointly select products that completely meet your expectations.
Send us an email and we will contact you shortly.

WRITE A MESSAGE

    Aby wysłać wiadomość, rozwiąż działanie*
    (Ochrona antyspamowa)

    Related products

    Prasa śrubowo talerzowa

    Screw-Disc Press

    Fully automatic device, allowing dewatering of deposits, made of acid-resistant steel.

    Chamber Press

    Filter presses are used to filter different types of deposits. They are used in the food, pharmaceutical, cosmetic and chemical industries. The use of presses in the filtration process allows for the achievement of high accuracy and efficiency. The chamber filter Press in its construction has a plate with internal connections, which are compatible with a large number of types and sizes of filter materials, including paper cartridges and textile filters. In the case of internal connections, the filter material itself acts as a sealing function and thus eliminates the problem of the selection of seals for various products.
    Prasa taśmowa

    Belt Press

    The principle of operation of the press is transparent and contains all the necessary steps in dewatering the sludge. The condensed sludge in the pre-thicker is fed into the low pressure zone tape. In this zone, the precipitate is evenly distributed over the width of the tape and dehydrated under the progressively increasing pressure of the successive pressure plates alternately with the bursting comb. At the end of the low pressure zone, the precipitate enters the sphenoid zone, where it is gradually squeezed between the conveyor belt and the tape-clout of the filter cylinder.