Prasa śrubowo talerzowa
Screw-Disc Press 1
Screw-Disc Press 2
Click to enlarge
Prasa śrubowo talerzowa
Storage tanks for chemical reagents
Back to products
Prasa taśmowa
Belt Press

Screw-Disc Press

Fully automatic device, allowing dewatering of deposits, made of acid-resistant steel.

Category:
Description

Principle:

The slow movement of the rings is caused by the rotation of the centrally placed Bolt and moves large agglomerates of the sludge without destroying their structure causing easy removal of liquids. The dehydrated sludge is then transported by screw to the press outlet. At the end of the chamber there is a lid which allows easy adjustment of sludge dewatering.

Equipment:

  • Dynamic Flocculator
  • SLUDGE Pumps
  • Polymer Pump
  • Control

Advantages:

  • Ten times lower energy consumption compared to a vortex press
  • Two hundred times lower water consumption for washing compared to belt press
  • Very low maintenance costs
Zapytaj naszego doradcy

DO YOU HAVE ANY QUESTIONS? Help

Having trouble choosing the right product? Write to us or call. Our experienced traders will help you make the right decision.

They are here to help you choose the right product or to solve a technical problem. If you have any questions about our company or offer, please feel free to contact us.

CONTACT US


Tel:
 + 48 24 276 13 80

E-mail:
 info@marextechnology.com

Address: Ul. Płońsk 10,
09-210 Drobin, Poland

Not sure what to choose? Contact us-we will jointly select products that completely meet your expectations.
Send us an email and we will contact you shortly.

WRITE A MESSAGE

    Aby wysłać wiadomość, rozwiąż działanie*
    (Ochrona antyspamowa)

    Related products

    prasa śrubowa

    Screw Press

    The screw press is used for dewatering and thicking sludge from industrial processes. Made of 316L acid-resistant steel. Powered by a pump, gravitationally from the tank or directly from the hopper. The device is equipped with a power station. This ensures greater efficiency and a better separation rate, especially with sticky materials. The dry matter content is regulated by the pressure force of the exhaust flap of the separator.

    Chamber Press

    Filter presses are used to filter different types of deposits. They are used in the food, pharmaceutical, cosmetic and chemical industries. The use of presses in the filtration process allows for the achievement of high accuracy and efficiency. The chamber filter Press in its construction has a plate with internal connections, which are compatible with a large number of types and sizes of filter materials, including paper cartridges and textile filters. In the case of internal connections, the filter material itself acts as a sealing function and thus eliminates the problem of the selection of seals for various products.
    Prasa taśmowa

    Belt Press

    The principle of operation of the press is transparent and contains all the necessary steps in dewatering the sludge. The condensed sludge in the pre-thicker is fed into the low pressure zone tape. In this zone, the precipitate is evenly distributed over the width of the tape and dehydrated under the progressively increasing pressure of the successive pressure plates alternately with the bursting comb. At the end of the low pressure zone, the precipitate enters the sphenoid zone, where it is gradually squeezed between the conveyor belt and the tape-clout of the filter cylinder.