Flow-through Chemical Station (rectangular)
Fully automated polyelectrolyte preparation and dosing: precise dissolution and homogeneous mixing in continuous operation.
This device is used for the precise preparation of a polymer solution. The station works in an automatic mode, ensuring the continuous operation cycle of the preparation of the polyelectrolyte.
The station is equipped with a polyelectrolyte hopper with a dosing screw conveyor and a conical hopper to moisturize the powder.
In the first stage, there is a mixing chamber into which water and polymer (in powder or emulsion form) are automatically added. Preliminary mixing takes place, after which the solution flows by gravity into a second chamber, where the polymer is thoroughly mixed with the water. The mixed solution flows into a third chamber, where it matures and becomes ready for use. The entire process operates continuously.
Water is dispensed automatically based on a liquid level sensor. Polymer is dispensed automatically based on the amount of water added. The operator is only responsible for ensuring that the polymer is available in the hoppers.
- Three chambers: make-up, mixing and maturation
- Polyelectrolyte hopper with a dosing screw conveyor
- Conical feed hopper for wetting the powder
- Driven mixer in each chamber
- Gravity overflow of the solution between chambers
- Liquid level sensor controlling water dosing
- Polymer dosed in proportion to the water added
- Works with powder or emulsion polymer
- 316L stainless steel construction
| Parameter | Value |
|---|---|
| Capacity | 0.5 - 1.5 m³/h |
| Material | 316L stainless steel |
| Design | flow-through station, 3 chambers (make-up, mixing, maturation) |
| Flow between chambers | gravity overflow |
| Mixers | driven, one in each chamber |
| Polymer form | powder or emulsion |
| Polyelectrolyte dosing | screw conveyor with conical feed hopper |
| Water dosing | automatic, liquid level sensor |
| Polymer dosing | automatic, proportional to the water added |
| Operating mode | automatic, continuous |
Sizing to the required polymer dose and system capacity is determined individually. See offer for details.
Batch Polymer Preparation Station (round, two-level)
A two-level station that dissolves and mixes water with polyelectrolyte concentrate, while the lower chamber stores the ready solution.
View equipment
Flow-through Chemical Station (round)
A compact cylindrical station for preparing, storing and dosing reagents, with the whole technology on one level.
View equipment
DAF Flotation Unit
Dissolved air flotation under laminar flow, together with a tube flocculator for coagulation, flocculation and pH correction.
View equipment