Automatic flow-through polymer preparation station
Fully automated polyelectrolyte preparation and dosing: precise dissolution and homogeneous mixing in continuous operation.
A fully automated polyelectrolyte preparation station. Reliable equipment built from 316L stainless steel throughout, with components sourced from leading manufacturers. Designed for precise dosing, complete dissolution, and homogeneous mixing of water with powdered polyelectrolyte. Automatic operation mode ensures an uninterrupted, efficient preparation and feed cycle.
The upper level houses a driven mixer, a polyelectrolyte hopper with a precision screw feeder, and a wetting cone that aids powder introduction. Water intake is handled by two integrated solenoid valves. A pressure transmitter mounted in the lower section monitors the entire process, ensuring accurate and repeatable filling of the mixing chamber with the set doses of water and polymer.
The tank below the upper level is equipped with a SIEMENS motor-driven mixer, a Ø70 Georg Fischer electric butterfly valve, a flocculant dosing pump suction lance, and a CERABAR pressure transmitter for minimum and maximum level signalling.
- 316L stainless steel construction
- Driven mixer on the upper level
- Polyelectrolyte hopper with screw feeder
- Wetting cone for powder introduction
- Two integrated water intake solenoid valves
- Pressure transmitter monitoring mixing chamber filling
- Lower tank with mixer (SIEMENS motor)
- Ø70 Georg Fischer electric butterfly valve
- Flocculant dosing pump suction lance
- CERABAR pressure transmitter (min/max level signalling)
| Parametr | Wartość |
|---|---|
| Capacity | 0.5 - 1.5 m³/h |
| Material | 316L stainless steel |
| Design | two-stage station (preparation + maturation) |
| Mixers | upper level with drive, lower tank with SIEMENS motor |
| Polyelectrolyte dosing | screw feeder with wetting cone |
| Water intake | two solenoid valves, pressure transmitter control |
| Valves | Ø70 Georg Fischer electric butterfly valve |
| Level signalling | CERABAR pressure transmitter (min/max) |
| Operating mode | automatic, continuous |
Sizing to the required polymer dose and system capacity is determined individually. See offer for details.
Pipe Flocculator
Forming stable flocs before the flotation process.
Zobacz urządzenie
DAF Flotation Unit
Separation of suspended solids and fats by dissolved air flotation (DAF).
Zobacz urządzenie
Post-flotation Sludge Tank
Collection and conditioning of post-flotation sludge prior to further processing.
Zobacz urządzenie